how often does your shotgun get cleaned. I wipe mine down with a silicone rag after every time shooting it. Run a bore brush and clean the barrel and wipe down after a days shoot for a ATA event usually 300 rounds. Usually once a month clean it very well in the cracks and crevices. Put a dab of grease on the pivot pins and working areas every time I put it together.
Often do you clean your shotgun
BT-99
1 - 20 of 69 Posts
how often does your shotgun get cleaned. I wipe mine down with a silicone rag after every time shooting it. Run a bore brush and clean the barrel and wipe down after a days shoot for a ATA event usually 300 rounds. Usually once a month clean it very well in the cracks and crevices. Put a dab of grease on the pivot pins and working areas every time I put it together.
Joined
·
1,435 Posts
I clean mine when it’s dirty
Joined
·
130 Posts
Wipe mine down with an oily rag and run a bore snake through it after I’m finished shooting & that’s all mine gets.
but I’m not one of these guys who keeps everything perfect. I view My trap gun & truck as a tools and when used, can get imperfections and dirty. I’m not saying don’t take care of your things but I don’t idolize them or make them something there not.
but I’m not one of these guys who keeps everything perfect. I view My trap gun & truck as a tools and when used, can get imperfections and dirty. I’m not saying don’t take care of your things but I don’t idolize them or make them something there not.
Joined
·
33 Posts
I wipe gun down after every use. Good cleaning after 500 rounds or so.
Yep.
Joined
·
530 Posts
Only shoot 50 or a 100 rounds a week, after every shoot I run the Outers 1 piece cleaning rod in and back in with the lube adapter in one time in each barrel, then wipe the outside down with Sentry Solutions Marine TUF-CLOTH and back in safe till next week, take apart every 6 months for a better cleaning
Joined
·
112 Posts
If I shoot several days in a row or a couple times in a short time period, I’ll let it go until I’m done for a while. It’ll get a good cleaning then. Otherwise, I just wipe it down to get the fingerprints off of the barrels. Modern powder is much more forgiving to bores than what shooters used to have to deal with....
Joined
·
1,947 Posts
Cleaned at the end of the day of use. I consider the cleaning a part of the using. I always try to do a complete job and not just a partial cleaning - because I'm already soaked in smelly bore solvent so I might as well do it all before I get cleaned up.
Joined
·
3,437 Posts
clean mine after every shooting session
Joined
·
53 Posts
I follow your cleaning method. Wipe it down after shooting, bore snake if needed and a good cleaning each month.
1 - 20 of 69 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
