If the price was right, it was not a mistake. Most of the threads are saying it is a waste of money to have a barrel ported and many also say it hurts the value. While it may not reduce muzzle jump or reduce recoil, I don't think it has an adverse affect on the gun other than the possible devaluation.
Just bought a trap gun with ported barrel mistake?
Hitapair
1 - 20 of 35 Posts
If the price was right, it was not a mistake. Most of the threads are saying it is a waste of money to have a barrel ported and many also say it hurts the value. While it may not reduce muzzle jump or reduce recoil, I don't think it has an adverse affect on the gun other than the possible devaluation.
Joined
·
3,523 Posts
Do not listen to the bunk about porting some like it others do not but it does help keep the barrel down for the second shot so it does not bother me either way as long as it is a good job by a good company. Not some wood pecker holes that are not straight or clog up.
Not to worry....Porting is fine...not a problem.
The gun is fine, the purchase is fine.
Previous posters are just saying that not worth going out of your way (time and expense) to have gun ported. But if you find a gun you like that has been ported no problem... is in no way a deal breaker.
WRT porting ..... if you are really looking to reduce recoil then you need to go with a lighter load, add weight to the gun or install a RAD system...i'm just sayin'
The gun is fine, the purchase is fine.
Previous posters are just saying that not worth going out of your way (time and expense) to have gun ported. But if you find a gun you like that has been ported no problem... is in no way a deal breaker.
WRT porting ..... if you are really looking to reduce recoil then you need to go with a lighter load, add weight to the gun or install a RAD system...i'm just sayin'
I went to the shootoffs once at the Grand in Vandalia, on a cold summer night. Coats and hats. From the wierd weather I could see the amount of propellant gas forced upward through the ports with each shot, I never would have expected so much. Never doubted after there is some benefit to the force pushing the barrel down.
Joined
·
6,479 Posts
Being a porting skeptic, I've asked some of the sport's large canines why their guns are ported. The universal reply was that while they doubted porting's ability to yield anything positive, they didn't want to take a chance on not having every small advantage their competitors might have. One told me the same thing about barrel work. For the average shooter, none of those things really matter much as we do not place our shot with the same precision as those guys.
Most porting haters got that way from shooting beside ported guns that spewed combustion ash on them and/or forced them to push their ear protection in extra-tight. It does increase the amount of combustion dirt in the air as well as the report of the gun while delivering little in the way of benefits. Shoot a ported shotgun with a breeze blowing in your face and you'll feel the fallout.
The more smoke a powder produces while burning, the more porting looks like it is really doing something and cold weather will exaggerate that appearance. Truth be told, ballistic experts will tell you that shotgun target loads do not generate enough combustion pressure for porting to be effective. I once owned two Krieghoff KS-5s that were identical except one was ported. No one who shot both guns back to back could tell any difference.
Does it reduce a gun's value? Yes for some people; no for others. Either way, if you bought the gun for a fair price, it's a no harm, no foul deal.
Ed
Most porting haters got that way from shooting beside ported guns that spewed combustion ash on them and/or forced them to push their ear protection in extra-tight. It does increase the amount of combustion dirt in the air as well as the report of the gun while delivering little in the way of benefits. Shoot a ported shotgun with a breeze blowing in your face and you'll feel the fallout.
The more smoke a powder produces while burning, the more porting looks like it is really doing something and cold weather will exaggerate that appearance. Truth be told, ballistic experts will tell you that shotgun target loads do not generate enough combustion pressure for porting to be effective. I once owned two Krieghoff KS-5s that were identical except one was ported. No one who shot both guns back to back could tell any difference.
Does it reduce a gun's value? Yes for some people; no for others. Either way, if you bought the gun for a fair price, it's a no harm, no foul deal.
Ed
Joined
·
503 Posts
I agree with what the majority has said so far. I own some guns that are ported and others that are not. Porting would not be a deal breaker for me if I liked the gun.
Joined
·
8,614 Posts
If the porting is factory done, you did great. The only time porting could devalue a gun (if that), is if it is aftermarket or (really scary) home done. If you were to believe the 10 or 12 people who would say otherwise you're making a mistake. At worst, I'd bet the current "disfavor" with porting is a cyclical thing like a lot of popular features. It always seemed like the 30" vs 32" O/Us discussion. Good luck.
Bob Falfa
Bob Falfa
Joined
·
8,533 Posts
lol yep, Magnaport ( proport) and Browning would cetainly disagree with you!
Joined
·
2,560 Posts
Forget about it and shoot the gun. I bought a KS-5 Special from a poster on this forum. He sent several pictures of the gun; but I couldn't tell if it was ported. I asked him and he said it was not. Upon receiving the gun it had been ported. (Angleport). I was upset but as the price was reasonable and the gun was in very nice shape, I decided to keep it. I'm glad I did. Does the porting help? Your guess is as good as mine. Would I go through the expense to have it ported? No. Anyway, enjoy the gun. Ed
Joined
·
4,830 Posts
Browning ports their target guns so it can't be all bad.
Joined
·
463 Posts
Having porting wouldn't stop me from buying a gun (my XT for instance) but I wouldn't pay extra to have it done. If you don't like it, you can be like me and never clean the ports; after a while the problem goes away!
John
John
One day I came up with the idea of testing the porting on my gun to see if it really did anything. I made an aluminum sleeve that covered the porting by sliding on the barrel with a slot to allow the sleeve to by pass the rib.
I fired a few shots with no sleeve to get the feel of the recoil and barrel jump. Then I put the sleeve on the barrel and covered up the ports. It was a tight fit so the porting would be sealed.
After firing the first shot with the sleeve on the barrel, it was no longer on the barrel. It was on the ground under the barrel. It was no longer tube shaped with a slot running the length of the sleeve. It was now a flat piece of 1/4 thick aluminum. The gas from the ports blew it right off the barrel. End of test. HMB
I fired a few shots with no sleeve to get the feel of the recoil and barrel jump. Then I put the sleeve on the barrel and covered up the ports. It was a tight fit so the porting would be sealed.
After firing the first shot with the sleeve on the barrel, it was no longer on the barrel. It was on the ground under the barrel. It was no longer tube shaped with a slot running the length of the sleeve. It was now a flat piece of 1/4 thick aluminum. The gas from the ports blew it right off the barrel. End of test. HMB
1 - 20 of 35 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
