Trapshooters Forum banner

1 - 20 of 59 Posts

·
Registered
Joined
·
15,944 Posts
Discussion Starter #1
You never heard of a Remington "G" Grade 1100? Neither have I. Here's the next best thing that is still under construction. Have to shoot it a little more to make sure it's just right before final sanding, checkering, & oil finish is applied to the English walnut. It's my concept however the real guy's doing the wood & metal work are the real pro's.
remdog1187_2009_0104423.jpg


remdog1187_2009_0104424.jpg


remdog1187_2009_0104425.jpg


remdog1187_2009_0104427.jpg


remdog1187_2009_0104428.jpg


remdog1187_2009_0104430.jpg


remdog1187_2009_0104431.jpg


remdog1187_2009_0104432.jpg


remdog1187_2009_0104433.jpg


remdog1187_2009_0104434.jpg


remdog1187_2009_0104435.jpg


remdog1187_2009_0104436.jpg


remdog1187_2009_0104437.jpg


remdog1187_2009_0104438.jpg


remdog1187_2009_0104440.jpg


remdog1187_2009_0104441.jpg


remdog1187_2009_0104442.jpg


remdog1187_2009_0104443.jpg


remdog1187_2009_0104444.jpg


remdog1187_2009_0104445.jpg


remdog1187_2009_0104446.jpg


remdog1187_2009_0104447.jpg


remdog1187_2009_0104449.jpg


remdog1187_2009_0104450.jpg


remdog1187_2009_0104451.jpg


remdog1187_2009_0104452.jpg


remdog1187_2009_0104453.jpg


remdog1187_2009_0104454.jpg



Once I get it completed in a few months I'll post the finished "Goldenboy".
 

·
Registered
Joined
·
7,214 Posts
About time somebody put some drool worthy wood on an 1100. Well done. I've got a nice English blank that may have to get machined for one of my 870's...just because I can.

Ron Burr
 

·
Registered
Joined
·
15,944 Posts
Discussion Starter #14
The metal finish is Diamondkote. Done by Mike Boglarski @ M&R Arms Specialties. Mt Clemens, MI. 586-954-3994

http://mrarms.com/

The stock by Midwest Gunstocks. Omaha, NE. Stephen Reynolds, stockmaker.
402-208-8080


http://midwestgunstocks.com/

Also the wood blank was purchased from Cecil Fredi of Las Vegas, Nevada.

http://www.gunstockblanks.com/
 
1 - 20 of 59 Posts
Top