Trapshooters Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
575 Posts
Its not so difficult, but you have to know what you are doing.

Having said this, I am currently having Wrights, fit another barrel assembly to a 97, which is the same process.

For most of us, the wise choice is to have a good gunsmith do the work.

ed.
 

·
Registered
Joined
·
3,324 Posts
It can be as easy as setting the thread adjuster to as difficult as replacing the threads they are lettered so as the gun wears you go to the next letter to tighten the barrel to receiver fit. If the first adjusting does not work I would then send the gun to Wrights he will have the different parts to fit the barrel properly.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top