Trapshooters Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hi all,

I purchased a 20 ga 1100 LW for my kids to start trap / skeet shooting with. The stock is a little long.

Any idea if the 870 or 11-87 will fit an 1100? what about a 12 ga, will that fit on a 20?

Does anybody have a youth stock they're willing to sell?

Any idea where I can buy a used one beyond ebay?

Thanks
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
Just my luck, Start looking for them and can't find them ;)

Cheapest one right now is almost 50, probably 60-70 by the time it's done. Almost cheaper to get one new...
 

·
Registered
Joined
·
925 Posts
this one may work think a 870 and a 1100 maybe interchangeable http://www.ebay.com/itm/used-remington-870-stock-/251217646860?pt=LH_DefaultDomain_0&hash=item3a7dbd150c
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #5 ·
Flip,

YOU ROCK.

Now since I have a LW. Does that make any difference?

I've been told the LW is a thiner receiver and does not fit the standard.

I've also been told a 12 GA will not fit a 20 GA.

Any idea if an 870 12 gauge stock will fit a 1100 20 LW? My intent is to fit it for my daughter.

Thanks!
 

·
Registered
Joined
·
868 Posts
lw is a small receiver. you need a late model stock from 1100, 870 or 1187
sub gauge gun. Remngton made only 2 different stock/receiver sizes for all models. You need the smaller one.
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #7 ·
Thanks LUGNUTZ426,

I've noticed on the end of the stock, on ebay there is a number stamped into it.

Sometimes 870, or 1187 but I've see 11, and 28 as well.

Is there anything that is stamped on the stock that would identify it as a "LW" stock?

FLIP,

I contacted the seller of the stock above, and he said it would NOT fit my rig.


Thx
 

·
Vendor
Joined
·
20,015 Posts
Have it professionally cut off, keep the porkchop and when they grow larger have it glued bak on. It will be fine looking both shorttend and with the chop attached. What you are looking for is a needle
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top