Trapshooters Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
999 Posts
Discussion Starter · #1 ·
I have ordered some Vectan AS powder to try out. I have all the components necessary to do a by the book 7/8 oz. load including the Nobel Sport 12ga. hull which I do not care for very much. I have read over the years that pretty much all straight wall hulls can be used interchangeably but am not sure if this is true. I would prefer to use Federal Top Guns instead of the N.S. hulls if I could safely do so.
Here is the load I want to do. 21.8 gr.AS,Fed 12SO,Ched209,N.S.hull,7/8OZ. 7.5shot1350F.P.S.at8700PSI.
Safe to switch or not?
 

·
Banned
Joined
·
853 Posts
I have read over the years that pretty much all straight wall hulls can be used interchangeably but am not sure if this is true.
For non-hunting target loads, yes, you can safely interchange data between all straight-wall hulls. Moreover, your proposed load has two additional safeguards: 1) light 7/8th's oz loads, and 2) well under 10,000 PSI.

Load away!
 

·
Premium Member
Joined
·
2,344 Posts
Mokeman, have you any pressure readings for heavier loads with the AS product?.......... Larry
 
1 - 3 of 3 Posts
Top