Trapshooters Forum banner
1 - 5 of 5 Posts

· Vendor
Joined
·
20,943 Posts
Usually. PGE almost always fit into TM guns. Pre '86 guns varied some as did the trigger frame housing. But file fitting is reasonably easy if it is too large. Never saw a trigger too small. File, Try. File try. File try. Wet sand smooth when done, cold blue
 

· Registered
Joined
·
731 Posts
I had 3 triggers for my tmx and all fit and worked fine the last trigger a got needed to be fit i had dan at giocamo do it at the PA state shoot took about 10min with a file. Most will fit with no problem
 

· Registered
Joined
·
488 Posts
I've seen a few triggers that have been subjected to some fairly brutal "fitting". Threads like this one point out the very real downside to the Perazzi design philosophy - it is just soooo easy to " fix".
As much as I admire the I-can-do-that kinda guy there are a few things that maybe should be left to the pro - like the barrel that came to me "fitted" into oblivion.
JMO of course
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top