Trapshooters Forum banner
1 - 6 of 6 Posts

·
Ya can't miss with a shotgun
Joined
·
3,107 Posts
It’s higher by 1/8th inch at the peak, at the rear end of the rib. The front end of the rib may be a little narrower to allow more adjustability downward. I have Pro-ribs on my Combo.

.
 
  • Like
Reactions: str8shtr

·
Registered
Joined
·
387 Posts
My 2 cents
The pro rib is approximately 1/4” taller at the rear (highest point) of the rib. The front is the same height as the standard TS rib.
I made the change because I was bottomed out (out of Adjustment) on the Standard TS rib and had a gap between the beads.
Now I have no gap, and now have a figure 8, and the same POI as I had with the Standard TS.
In my case it worked out for me, I was not looking for 120% POI, my POI is around 90%.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top