[leftex]

Our club is making plans to replace the concrete on 2 of our fields. Both are trap/skeet combination. I've come up with the dimensions for the skeet fields but need help with the trap fields. I've looked around some but haven't really found what I need. Any help is appreciated.

 

[Dukefan]

https://shootata.com/Portals/0/pdf/ATA_Trap_Field_Diagrams.pdf

 

[leftex]

Thanks, that is helpful. However I don't see anything pertaining to elevation as in how far above the trap is the concrete.

 

[jjhess]

At the same level

 

[Dukefan]

Thanks, that is helpful. However I don't see anything pertaining to elevation as in how far above the trap is the concrete.

https://shootata.com/Portals/0/pdf/Traphouse_prints.pdf

 

[leftex]

Looks like the concrete is 1'5/16" above the plate that the machine mounts on?

 

[Abolt243]

Page 46 of the rulebook, trap houses. Specifically addresses the height.

 

[Little B at BS]

This is a pretty good drawing of the trap house itself. It gives you the elevation for the concrete.

 

[Little B at BS]

Here is another pretty good diagram for trap fields.

 

[Abolt243]

If you’re talking about the elevation of the concrete walkway at station 3 at 16 yards, this is from page 46:
“It is recommended that the throwing surface (throwing arm or plate) of the trap machine be on the same level as that of Post 3 and the target height setting pad.”

 

[Dukefan]

 

[tryinhard]

shooting-academy.com has info you might be looking for, I think the registration is free and a lot layout prints available. Bub.

 

[leftex]

A big thank you to everyone. I do believe I now have all the information I need to give the contractors so they can make accurate bids.

 

[mg1polo]

Thanks, that is helpful. However I don't see anything pertaining to elevation as in how far above the trap is the concrete.

Parallel to it.
MG