Trapshooters Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter #1
Hi,
Perazzi owners.. When tightening a Perazzi Stock, How tight do you make it? Ive been told that when the bolt is seated just go another 1/4 turn. Is this correct? Some shooters have told me too crank it down real tight, Others have told me do it like above a 1/4 turn upon seating the bolt, They said that info has come from Giacomo..Ive been doing the 1/4 turn I dont want too crack the stock by doing it wrong.. Give me some input..Thank You Richie
 

·
Registered
Joined
·
29 Posts
You can get them too tight resulting in cracked stocks as mentioned and also interfere with the trigger as you can bow the frame. Snug is all that's needed, 4-6 foot-pounds is adequate and then check them once in a while. DGG
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top