Trapshooters Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter #1
I have for sale Kolar Pro-Soft gunstock, I will try and tell you everything about it but if I missed something or if you have any questions please PM me.


Picture of the Pro-Soft left side, This is with the Soft Comb and flat Kick-ezz recoil pad. Note that it does have a Jones buttplate, You will see in other picture that I have a Kick-ezz curved pad for it also.

recoillesstwoatlow8_2012_240884.jpg




A picture of the Forearm, Left side.

recoillesstwoatlow8_2012_240893.jpg




A picture of the stock on the right side.

recoillesstwoatlow8_2012_240894.jpg




A picture of the Forearm right side.

recoillesstwoatlow8_2012_240895.jpg




A picture of the right hand palm swell.

recoillesstwoatlow8_2012_240896.jpg




A picture of the back of the stock, note twist.

recoillesstwoatlow8_2012_240897.jpg




A picture of the Length of pull to where my trigger is, please note that you will have an adjustable trigger so you can almost set this at 14-3/4" right now its around 14-1/2".

recoillesstwoatlow8_2012_240898.jpg




A picture of the drop of the comb (soft comb), the piece of wood on the top is sitting on the tapered rib. With these post in the soft comb, you can raise another 3/8" if needed.

recoillesstwoatlow8_2012_240899.jpg




A picture of the hard comb that also comes with it, I did install the longer post also, (you will get both sets of posts). Right Side

recoillesstwoatlow8_2012_2408100.jpg




A picture of the hard comb left side.

recoillesstwoatlow8_2012_2408101.jpg




A picture of the drop of the comb (hard comb), the piece of wood on the top is sitting on the tapered rib. With these post in the soft comb, you can raise another 1/2" to 5/8" if needed.

recoillesstwoatlow8_2012_2408102.jpg




A picture of the comb from the rib again, this would be around max height for the flat tapper rib.

recoillesstwoatlow8_2012_2408103.jpg




A picture of the trap pad and maxed to the right and the comb all the way up.

recoillesstwoatlow8_2012_2408104.jpg




A picture of the trap pad, with length of pull, note again this can be adjusted by your trigger, mine is almost all the way back, see picture before to see trigger position.

recoillesstwoatlow8_2012_2408105.jpg




A picture of all the accessories with the stock, 2 adjustable combs, spring set with 4 springs and one in the stock itself, and extra small spring for the adjustment of the magnets, this one and one in the stock. 2 recoil pads a flat and a trap. Note there is one plate on the stock and these 2 pads with metal brackets so you will just have to change out the 3 screws if you want to change the pads. Also an extra 3 position block for the jones. Extra parts for the internal portion on the recoil reducer and instructions on how to change the springs.

recoillesstwoatlow8_2012_2408106.jpg




Sorry for the long post, but I hope I satisfied your needs for picture and explanations, again if you have any questions please PM me.
I am Asking $2900.00 OBO with everything pictured. I am located in Wisconsin, so if you want to see this first hand please let me know and we can install it on your Kolar.
Thanks for looking
 
1 - 10 of 10 Posts
Top