Trapshooters Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
13,624 Posts
Discussion Starter #1
Email Address: [email protected]

<center>
<a href="http://smg.photobucket.com/user/Skeet_Man/media/1100%20timney%20aluminum/001_zpsb04d8e48.jpg.html" target="_blank">
</a>
<a href="http://smg.photobucket.com/user/Skeet_Man/media/1100%20timney%20aluminum/002_zpsd010ae78.jpg.html" target="_blank">
</a>
<a href="http://smg.photobucket.com/user/Skeet_Man/media/1100%20timney%20aluminum/003_zpsf1c2766f.jpg.html" target="_blank">
</a>
<a href="http://smg.photobucket.com/user/Skeet_Man/media/1100%20timney%20aluminum/004_zps25642a7e.jpg.html" target="_blank">
</a>
<a href="http://smg.photobucket.com/user/Skeet_Man/media/1100%20timney%20aluminum/005_zpse660cca3.jpg.html" target="_blank">
</a>
</center>

For Sale:

Remington 1100/1187 pull trigger group. Gloss black finish. This is a Remington OEM aluminum framed trigger group, that was modified by Timney for his wider trigger blade, which is MUCH more comfortable to shoot than the narrow factory trigger.

This will work in Remington 1100/1187 12ga right hand guns. It will also work in 1100 16ga and 20ga standard weight guns, as well as left handed 1100s and 1187s, by swapping out carrier (2 minute job).

Just installed the yellow "light trigger pull" OEM sear spring.

Right hand safety (left hand Fortmann safeties are available from Midway if you have to have a left hand safety).

This trigger group has very little wear, and may have been someones backup. It exhibits the kind of wear you'd expect to see on a brand new trigger after using it for one shoot.

Very little wear on the gloss blued carrier.

This would be a great candidate to have converted to a release trigger if you were so inclined, as the wide trigger blade is even more comfortable when shooting a release trigger.

It has been completely disassembled, ultrasonically cleaned, and re-oiled, and is ready to rock and roll.

These aluminum framed "Timneys" aren't very common, I've only ever seen one other one and it was one that I owned. It is 4.25oz lighter than the steel framed Timneys, if you are looking to save a little weight.

$150 shipped (about 1/2 of what you'll spend for a steel framed Timney trigger).

SOLD
 
1 - 2 of 2 Posts
Top