Trapshooters Forum banner

Status
Not open for further replies.
1 - 14 of 14 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter #1
Kolar TS Trap Single 34” barrel with 3 factory chokes.
2 adjustable ribs and adjustable comb and extra barrel hanger.
Metal in excellent condition, wood in very good condition with minor handling marks on the grip area.
All complete with tools and manual in Kolar Americase.
$4800 plus shipping.

houghtonaz_2008_030319.jpg


houghtonaz_2008_030320.jpg


houghtonaz_2008_030321.jpg


houghtonaz_2008_030322.jpg

 

·
Registered
Joined
·
131 Posts
Discussion Starter #2
Gun has wood upgrade per factory paperwork and a .740 bore. Made in July 2006. Thanks for looking
 

·
Registered
Joined
·
144 Posts
Wow! Thats a great price! The TS is one of the best guns I have ever owned and shot! Quality guns! Bought mine from Doug Wolk with Shotgun Specialties. I think a new one today would cost close to 7800.00 + upgrade charge for better wood.

Somebody is gonna get a great deal!


...........Rod
 

·
Registered
Joined
·
1,805 Posts
where in gun located? in your fourth picture, is that a long scratch running down the grip or is the only damage on the corner of the grip. thanks BYG
 

·
Registered
Joined
·
1,805 Posts
thanks for the info. f im not wrong there are 3 different ribs for this gun with varying POI. What two ribs come with this gun? thanks BYG.pm sent also
 

·
Vendor
Joined
·
19,650 Posts
That finish chip/dent on the pistol grip is repairable. Lite sand with 400 or 400 wet sand, apply Minwax polyurethane varnish very thin and feather it out as thin as you can get the varnish to show. Then it will not show lap marks after it dries. I do it all the time. All you need is about 2 coats. Thin coats is the key to not having it show.
 

·
Registered
Joined
·
131 Posts
Discussion Starter #10
The rib on the gun will go from about 60 to 100% high. The extra rib will go to over 100% high.
 

·
Registered
Joined
·
131 Posts
Discussion Starter #11
Had a few offers on the gun but still available. Might consider trade for sxs especially an RBL in 12ga or 28ga. Thanks. Dan
 
1 - 14 of 14 Posts
Status
Not open for further replies.
Top