Trapshooters Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
384 Posts
Discussion Starter #1
Sold Thanks TS.com
Beretta A303 30” High Rib Barrel with Briley S25M series chokes. Not sure who did the rest of the work but it is interesting.
The rib is a .5” high at the rear most post and tapers down to .325” at the muzzle with 9 posts total (I don’t know what POI this gives) and the rib is .380” wide at the rear and tapers down to.290” at the muzzle.
Bore is backbored to .742” at 25” back from the muzzle to 8”from there it tapers down to .732”, then transitions to the Briley chokes- 3 are included; Full .693”, IM .697”, Mod .713”.
It also has a shell deflector button installed on the barrel extension. Fine bead blast Matte Finish Bluing, has a few rub spots and mars in the finish 90% or so. Nice condition but missing the midrib bead.

$475 +$ 15 shipping & Ins
. As always, no hassle full refund if you don’t like it.

Tom Urich



To find these measurements I used my Dial Bore Gauge that I got from the Unloader (Gary Bulley), very cool tool!












 

·
Vendor
Joined
·
7,105 Posts
tom- you have a PM--wally
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top