Trapshooters Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter #1
This is a Lyman Cutts barrel with SPRDR choke. It has been shot about 1 box since the barrel was made up. The Cutts was professionally installed on a perfect old style (heavy) 1100 barrel that was originally a MOD choke barrel. The length of the barrel measured from the rearmost section of rib is 27-1/2" to the end of the choke. There was never a center bead on this barrel, it has a standard silver metal bead on the Cutts can. The bluing is bright and shiny on the Cutts can and barrel, no nicks, scratches or dings. There are a couple very small spots on the barrel on one side from where it was sitting in a cardboard box. It's a nice setup for a skeet shooter. I believe Lyman was the original production company for the Cutts, but Kolar made them too for a while.

I personally don;t like the sight picture.

Asking $295.00 - local pickup in Northern VA is fine.

Will post photos tomorrow
 
1 - 5 of 5 Posts
Top