Trapshooters Forum banner

Since it is not easy to find every component you need considering cost I have a question that will likely get me slammed!

1.3K views 13 replies 9 participants last post by  Tron  
#1 ·
I have 100 cci 209m primers I would like to use I have WW AA , Remington; federal hulls . Several wads but only Hogdgon power . I can’t seem to find data for 1 Oz - 20 ga cci 209m have it for just 209.
would I be totally out of line to use the 209 data with a 209m primer?
thanks for your help.
 
This post has been deleted
#7 · (Edited)
wow!... its getting harder and harder to offer years of sage advice to some people.

on a side note, in the metallic reloading world, I had always heard CCI primers were hotter than most as being the primary primer for mil loads. Interesting that in the shotgun world it is different. What does the "m" he mentioned designate?
There are 2 CCI 209 primers, the regular CCI 209 and the hotter CCI 209M, where the "M" likely stands for "magnum." In terms of "hotness," the CCI 209M is on a par with the Fed 209A.
 
#12 ·
I’m gonna build on Nebs reply and say find a recipe for a FED209A primer that use’s a straight wall hull. Lower pressures that are traditional to straight wall hulls will help you stay safe while trying to use up those primers.
Thank you!
Looks like the mods did some clean up on aisle 9.
I owe someone an apology but now can’t find who it was! I thought my grammar was being criticized ( which is terrible) but it was a ficus statement that I missed ☹ sorry to who ever it was!