[hwy13]

Hello,

I sent my top single Beretta to Simmons it was loose also, they replaced the rib ,exc. work, call them & ask questions.
I would send another shotgun to them if it needed work.

 

[Bang Bang]

Thanks hwy I will look into them

 

[Bang Bang]

Anybody have names of people they would recommend for silver soldering?

 

[shooter99]

http://www.moneymakerguncraft.com/ Check with MoneyMaker for cost

Simmons cost on a rib is $350 plus shipping I had to send a barrel back to them as it was coming apart from the mono block. They had built the barrel and would not stand behind it.

 

[BigM-Perazzi]

Call Coles.

 

[cubancigar2000]

Roger Eubanks, Homedale Idaho, Eubanks Gunsmithing

 

[Avaldes]

Also keep in mind that a NIB Beretta 68X barrel is $900. Weigh that against the cost of repair.

 

[hairtrigger]

phil crenwegle

he did 3 soldering ribs for me good man with a tourch i must say.

210-313-5988

 

[greengael]

I would try Loctite "Blackmax" It has worked for me.If you must solder then make sure to use Johnsons paste wax to protect the barrels to avoid the cost of re-bluing. yrmv

 

[b12]

I've tried blackmax. Didn't work for me. What does Johnson paste was do.
I used to do alot of silver soldering years ago. I thought about doing alittle practice just to see how well I can still do it. Might give it a try myself after some practice. Bill

 

[trapshooterjoe7]

Use Hi Force 44 solder from Brownells, it works good. Joe