Trapshooters Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
686 Posts
Discussion Starter #1
Are there any aftermarket kits that would lighten up the trigger pull of a Smith & Wessom M&P 9mm semi-auto? Please advise. Thanks. john
 

·
Super Moderator
Joined
·
4,959 Posts
You want the ApexTactical sear and USB.

There are other parts, but those are the most critical.

With just the sear installed the pull will be about 4.5 lbs.

With the USB installed, all of the grittiness will go away. The pull will remain about 4.5 lbs.

There are installation videos on youtube.
 

·
Registered
Joined
·
144 Posts
Hey John, I have an M&P 40 and installed the Apex Duty/Carry Action Enhancement Kit (DCAEK). I'm sure this is exactly what you're looking for. The trigger pull on the OEM gun was 6.52, after installation of the kit the take up is much shorter, smoother, and brought the trigger pull down to 5.5. By far the best investment you will make for the gun.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top