Trapshooters Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
694 Posts
Discussion Starter #1
Does anyone know , or can measure their Rib on the Krieghoff Trap
PRO or Ceaser Magnuns trap.

These ribs seem to be an inch or more..
Does that seem correct?

Most are about 1/2-3/4 that I see, but these seems to be about 1.5 at the high point

Anyone have one of these guns/barrels or ribs?
 

·
Banned
Joined
·
2,825 Posts
I have a Trap Special. The rib height is 1 1/16th at the back. This rib is the normal rib shipped from Krieghoff. The Pro-Rib is an 1/8th of an inch higher in the back and .050 lower in the front. My gun shoots 90%. The Pro-Rib gun will shoot 120% stated by Krieghoff. Is this what you need to know? Thanks, Roy A. Morton
 

·
Registered
Joined
·
99 Posts
I just e mailed CG with this question on fri, the response I recd was the un-single is 1.05 inches tall from the false top barrel.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top