Trapshooters Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
91 Posts
Discussion Starter · #1 ·
Hi Guys

Just ordered a Mec 9000g. In reviewing recipes to replicate the Remington "STS" target load, I have no idea which of these formula's I should produce and try first.

Knowing that there is a wealth of knowledge, experience and a few blown barrels on this site, I am asking if you could share your experience and knowledge please.

1 OZ. LOADS

ALLIANT RED DOT 18.0 209 Premier STS TGT-12S 2-3/4 dram (1180 ft/sec)

IMR 700-X 15.5 209 Premier STS TGT-12S 2-3/4 dram (1145 ft/sec)

HODGDON CLAYS 17.9 209 Premier STS TGT-12S 2-3/4 dram (1180 ft/sec)

HODGDON TITEWAD 16.7 209 Premier STS TGT-12S 2-3/4 dram (1180 ft/sec)

1-1/8 OZ. LOW RECOIL LOADS

ALLIANT AMERICAN SELECT 17.5 209 Premier STS FIG 8S 2-1/2 dram (1090 ft/sec)

1-1/8 OZ. LIGHT TARGET LOADS
ALLIANT RED DOT 18.0 209 Premier STS FIG 8S 2-3/4 dram (1145 ft/sec)

ALLIANT AMERICAN SELECT 18.5 209 Premier STS FIG 8S 2-3/4 dram (1145 ft/sec)

IMR 700-X 16.5 209 Premier STS FIG 8S 2-3/4 dram (1145 ft/sec)

IMR PB 21.5 209 Premier STS FIG 8S 2-3/4 dram (1145 ft/sec)

HODGDON TITEWAD 16.5 209 Premier STS FIG 8S 2-3/4 dram (1145 ft/sec)

1-1/8 OZ. HEAVY TARGET LOADS
ALLIANT RED DOT 19.0 209 Premier STS FIG 8S 3 dram
(1200 ft/sec)

HODGDON INT'L CLAYS 20.9 209 Premier STS FIG 8S 3 dram
(1200 ft/sec)

Thanks Tony
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top