Trapshooters Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
452 Posts
gunmoney, the easiest indicator is two socket-head screws in the lower area of the recoil plate, below the firing pins. If you do a search on this forum you will find a lot of 3200 info, and pictures of the inside of the receiver showing these two screws. Also, check the serial number on the bottom of the receiver. If there is a dot or a decimal point, that's a mark that the factory and now Pat Laib put on the gun when the updates are done. Jerry
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top