Trapshooters Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter · #1 ·
rem 1100 won

my rem 1100 won't fire drop a shell in and have to hit closer hard to load shell but can't load any shells in magazine pull triger and nothing wont even click I can't even see firing pin what is wrong thanks geo 3
 

·
Registered
Joined
·
943 Posts
Your barrel has two of the metal gas rings on it is my guess.

Take the barrel off and look. Happened to me once. One was still situated up in the channel of the barrel and the other was on the magazine tube.
 

·
Registered
Joined
·
2,364 Posts
Sounds like the rings are not going up inside the gas port under the barrel because they are dirty/broken/on wrong/etc. I have also had the indention that is at the back of top side of the barrel (top of chamber) plug up with crap and the bolt won't close properly. You could also have a primer or something stuck in the trigger mechanism which is keeping it from closing properly.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top