Trapshooters Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter · #1 ·
rem. 1100 doesn't shoot couldn't load shells wouldn't close took apart cleaned and trigger would shoot put back in gun and didn't even get a click any idea what is wrong or what might be broken need a little help thanks geo3
 

·
Registered
Joined
·
268 Posts
Discussion Starter · #2 ·
any gunsmiths out their I still don't know why this gun doesn't fire when trigger is out shoots fine when put back in gun you pull it won't shoot is their a broken part or what any help please would be app. geo 3
 

·
Registered
Joined
·
719 Posts
Not a gun smith but a lot of 1100 experience. Sounds like the bolt is not going into battery. Make sure the cocking lever is full forward in the slot, if not find out why.
 

·
Registered
Joined
·
159 Posts
Make sure the barrel is assembled properly and is tight against the receiver. If the "O" ring is an aftermarket X type it's probably too big in cross section and won't let the barrel seat agianst the receiver. If the barrel is not seated the bolt won't go into battery and allow the hammer to drop.

Jere
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top