Trapshooters Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Premium Member
Joined
·
4,248 Posts
Discussion Starter · #1 ·
Many people ask me about how difficult it is to install this release hook. Here is a picture of the trigger assembly. You would replace the "sear" with the release hook.Remove the hammer bushing with c clip and the hammer falls out with the two braces. Remove the trigger pin and the hammer come out. Remove the trigger bushing and the sear come out. Reverse the order for reassembly. Should take about 10 minutes $65.00 delivered to you. Drop in installation. 391 needs slight fitting at the sear to match your existing sear which can be done with a file. Motordoc

trigger group photo courtesy of Seamus O'Caiside. http://www.shotgunworld.com/bbs/viewtopic.php?f=73&t=123733
 

·
Registered
Joined
·
1,326 Posts
I have one of these. It really is easy to install. Without ever having taken my trigger group apart, I installed mine in about 15 minutes. Now that I've done it once, I can do it in about 5 minutes.

If you ever were thinking about trying a release trigger, this is by far the least expensive way to do it.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top