Trapshooters Forum banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #1
I SHOOT A BERETTA 687EELL AND THE STOCK NEED REFISHED. I WOULD APPRECIATE ANY RECOMMENDATIONS ON WHO I SHOULD HAVE DO THE WORK. I WANT A NICE JOB BUT I DON'T WANT TO DUMP A FORTUNE INTO THE PROJECT. THANKS KK
 

·
Registered
Joined
·
6,075 Posts
Paul Altland, Timberland Stock Shop, Hanover, PA (717) 637-4978. Paul has done dozens of Berettas since they went to their matte oil finish - his work is super and his charge usually runs about $160.

Here's one he did for me.




Ed
 

·
Registered
Joined
·
1,530 Posts
Dave Wolf in Waco TX is the best I have seen or used. He is not cheap but his turn around time is unbelieveable and the work is top notch. His specialty is making cracks disappear and he can certainly do that.
 

·
Banned
Joined
·
9,042 Posts
Here is a stock I just finished. Actually, the receiver and all was redone, not the barrel. TM-4. Jon



 

·
Banned
Joined
·
9,042 Posts
There was 20 coats of Tru-oil sprayed on, every 24 hours. Then let dry for a week. Then wet sanded, and buffed with headlight lens cleaner. Then applied some high priced liquid car wax. The father inlaws request was for "shiny". I think he will like it. Jon
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top