[Raider Red]

Has anyone tried this powder? Looking for info on correct bushing to use for 18.2 grains for a PW 800 Plus. I use Nitro Hulls, 1oz claybuster wads, and cheddite primers. Thank you

 

[Rhodesengr]

yes and been asked many times. Please search back. You should never rely on someone here telling you what bushing to use. Powder varies from lot to lot so you have to check every new bottle anyway. Use the powder charts to get close and then check your drops.

Comp certainly goes bang but I find it annoying to use. It is very fine grain and tends to "powder bar dribble" and "powder migrate" due to static charge on the hull and wad.

Listed loads are on Hodgdon.com and the Western Powder V8 PDF

 

[Raider Red]

Thanks, FYI, I would weigh the charge several times before trusting the bushing. Ive been reloading for 55 years.

 

[Nebs]

Here's a bushing chart. You can use Hornady bushings in the PW loaders. I'd start with the Hornady #420. Also, 3D-printed bushings are now available on eBay for cheap.

 

[bkt514]

Raider, sent a PM

 

[burgy]

Has anyone tried this powder? Looking for info on correct bushing to use for 18.2 grains for a PW 800 Plus. I use Nitro Hulls, 1oz claybuster wads, and cheddite pr