Trapshooters Forum banner

1 - 9 of 9 Posts

·
Supporting Vendor
Joined
·
5,828 Posts
Fred, you might want to put a post in the "Wanted to Buy" section too.
 

·
Premium Member
Joined
·
5,912 Posts
For some reason, I thought PW made an Auto Drive unit for the 366,but looking at the PW website, I don't see it. Did they discontinue it? Or am I just mistaken?
 

·
Registered
Joined
·
21,600 Posts
They discontinued it over the last several years.
 

·
Supporting Vendor
Joined
·
5,828 Posts
The Auto-Drive for the Hornady 366 was discontinued last year.
 

·
Registered
Joined
·
71 Posts
Don't bother with an autodrive on a 366. If anything binds the turn table the pawl will bend and you're done until a new pawl is installed. It's not a big deal but you would need to buy pawls by the dozen. Get yourself a PW 800+ and put an autodrive on it and never look back.
 

·
Banned
Joined
·
1,598 Posts
Don't bother with an autodrive on a 366. If anything binds the turn table the pawl will bend and you're done until a new pawl is installed. It's not a big deal but you would need to buy pawls by the dozen. Get yourself a PW 800+ and put an autodrive on it and never look back.
Yep, what he said. I ran one on a 366 and got tired of bending back the pawl. I also had 5-6 new ones laying around also. The 366 is just not a good candidate for a auto drive.
 
1 - 9 of 9 Posts
Top