Trapshooters Forum banner

Pros and cons of raised rib guns

24K views 45 replies 39 participants last post by  Mr. Lester  
#1 ·
What’s the pros for getting raised rib gun for trap. Am I really any better off getting a gun with a raised rib vs a flat rib? I plan to shoot this gun primarily for trap.


Sent from my iPhone using Tapatalk
 
#6 ·
Depends on head position, neck, stance..... too many variables.

I don’t believe it gives you more time to see the clay. If it did, all the Olympic trap shooters would be using them. Remember the rib is relative to the comb height. A high rib barrel on a low field stock just won’t work for most folk.

I shoot s mid height 682 X trap. But I can also shoot a low rib Rizzini. Comb height changes relative to rib height.
 
#9 ·
The consistency with which the shooter mounts the gun seems to be more critical with a high rib than with a low one. Many shooters mount the gun more firmly when practicing or dry mounting and don't keep their face as hard into the stock during a shot than they do when the mount. Both of these factors can change the gun's point of impact a bit more off the high rib than off the lower one and cause more "mystery misses". I attended a Kiner clinic several years ago using a friend's high rib Kolar Max Trap and initially had a lot of trouble with inconsistency...mystery misses. Phil made a 60-sec video of me shooting angles and immediately picked up slight changes in cheek pressure that were causing the misses. I've since corrected my mount problem but I'm still happier with a standard trap rib than a high one.
 
#11 ·
I can shoot a flat rib or a raised rib gun equally well, but I see the target better with a higher ribbed gun.

I have been shooting the higher ribbed style gun for about 3 years now and I think it's where I'll stay.

My rib is not super high. The gun I shoot is a Dennis Devault custom Beretta 391 Gold Sporting w/adjustable rib and comb.

Different strokes for different folks!

Good Luck and Good Shooting!
 
#20 ·
Puff without sounding stoopid or disrespectful, what does keying actually mean? I have never heard that saying and I am 67 years old...... Joe

BTW.................. If you purchase a high rib gun or a low rib gun, the manufacturer constructed the stock accordingly. Considering the gun fits properly, there is no difference between both. The taller ribbed gun eliminates the amount of barrel you see in your peripheral vision. Joe
 
#21 ·
I like higher ribs, but there is such a thing as too high for me. I also like combo, so my rule of thumb is this. If the rib on the O/U is high enough to mitigate heat risers in the summer, then the rib height of the unsingle is okay as well.

As mentioned above, it is MUCH easier to pick up the bird with a higher rib.
 
#24 · (Edited)
High rib guns favor shooters that shoot fast and hold a high gun. They want to acquire the target as quickly as possible. It favors there shooting style that is all. It doesn’t make them better or worse just different. I notice a lot of long neck, tall people shoot them as well, but this doesn’t all ways fit the mold. I personally really like my high rib guns. I’m 6’ 1” with a long neck and I like to shoot fast. The negatives of it, I have never had the canting issue that some talk about in this post.
 
#27 ·
I am not sure if this will benefit your shooting. But this is everything you could have asked for.

See the neck is completely straight, shoulder relaxed, elbow up, you can see the target 6' down before a flat rib does.

View attachment 1525211
.

"Hey, do you have anything for me? That stock has too much drop"

.
Image
 
#30 ·
Like them both, shoot both about the same. My emphasis is on stocks.
Great point, I have a MX10RS (unsingle) with a straight neutral stock and a MX10 (top single) with a nice palm and 1/4" offset. The latter is softer shooting (contrary to the common belief that unsingles have less recoil) and more comfortable to shoot. I haven't been shooting either long enough to know which I shoot better but I defiantly hit them harder with the top single. It has Wilkinson barrel work and Briley choke tubes while the RS is fixed full around .032 constriction. Another suprise as I always thought fixed choke's hit targets harder than choke tubed barrels.