Trapshooters Forum banner
1 - 7 of 7 Posts

·
Supporting Vendor
Joined
·
6,164 Posts
Discussion Starter · #1 ·
I have just introduced a new design on my Clear View reservoirs for the P/W reloaders. I re-designed the PYREX powder reservoir. The glass tube is now attached to the aluminum base with epoxy. No o-rings, no aluminum tape. The powder reservoir is now very solid. The interior shape is now identical to the Spolar PYREX powder reservoir that I make. I had to increase the amount of offset on the shot reservoir to clear the new powder reservoir so it is not backward compatable with my previous reservoirs. All in all it is a more durable design. It eliminates the powder trapped between the base and the galss. The reservoir now drains completely.
Auto part Composite material Machine Nickel Metal


Here is a link to my for sale post: For Sale - Clear View Reservoirs for P/W Loaders

Font Automotive lighting Automotive tire Circle Rectangle


I also make a version of my Clear View Reservoirs that will fit the P/W 375 and P/W progressive loaders (800/900) with the older top plate (tall tubes). This is a special order item.
Wood Material property Gas Font Tool

Liquid Drinkware Fluid Cylinder Material property
 

·
Supporting Vendor
Joined
·
6,164 Posts
Discussion Starter · #2 ·
BUMP
 

·
Supporting Vendor
Joined
·
6,164 Posts
Discussion Starter · #3 ·
up
 

·
Supporting Vendor
Joined
·
6,164 Posts
Discussion Starter · #4 ·
BUMP
 

·
Supporting Vendor
Joined
·
6,164 Posts
Discussion Starter · #7 ·
Question, and sorry if it’s dumb. But are you still able to change bushings easily?
Yes, you can easily change the bushings.
 
1 - 7 of 7 Posts
Top