Trapshooters Forum banner

1 - 14 of 14 Posts

·
Premium Member
Joined
·
440 Posts
Discussion Starter #1
Is there a chart that shows the inside diameter of Ponsness Warren powder bushings. Thinking of turning some in between size bushings if Hornady/RCBS does not offer anything close.
 

·
Premium Member
Joined
·
1,146 Posts
Here is what I have for bushing inside diameters in inches.
Ponsness-Warren/Mec/Hornady Bushings
Powder # Decimal Shot # Decimal Ounces
1 AX .249 //////// 4 .561 7/8
2 AX .250 //////// 5 .601 1
3 AX .251 //////// 5.5 .618 1 1/16
A .309 ////////// 6 .646 1 1/8
Mec 14 .312 ///// 7 .672 1 ¼
B .313
C .323
C 1 .329
Mec 16 .329
D .334
Mec 17 .335
Mec 18 .342
D 1 .343
Mec 19 .350
Mec 20 .356
Hor 363 .363
E .364
Mec 21 .365
E 1 .371
Mec 22 .374
E 2 .380
Mec 23 .381
Mec 24 .389
PW HM .390
F .392
F 1 .393
PW HM .398
Mec 25 .395
PW HM .404
PW HM .405
PW HM .407
Mec 26 .409
G .410
G 1 .414
Hor 420 .420
Hor 426 .426
Mec 29 .427
H .428
I .434
Mec 30 .436
Hor 441 .441
Mec 31 .443
J .445
J 1 .449
Hor 450 .450
Mec 32 .451
K .453
Mec 33 .459
L .465
Mec 34 .467
Mec 35 .470
M .475
Hor 480 .480
Mec 36 .483
Mec 37 & PW N .490
O .494
Mec 38 .498
P .503
Q .505
Mec 38 A .508
Mec 39 .510
R .513
S .519
Mec 40 .530
T .536
U .552
V .559
W .573
X .578
Y .592
Z .623
 

·
Registered
Joined
·
558 Posts
I have some Hornady bushings that I bought from a guy that he had marked the size on the side of them with some kind of marker. Makes them much easier to see. What ever kind of marker he useed makes a very fine line and seems to stay on very well. Does anyone know what kind of marker this could be and where to obtain one.
 

·
Premium Member
Joined
·
1,146 Posts
Here are the smaller MEC bushing sizes, don't know why they did not show up on my first chart. Regards, Bob

Powder # Decimal
Mec 10 .264
Mec 11 .272
Mec 12 .280
Mec 13 .298
 
1 - 14 of 14 Posts
Top