Trapshooters Forum banner

Status
Not open for further replies.
1 - 16 of 16 Posts

·
Registered
Joined
·
402 Posts
Discussion Starter #1
Does anyone have a document or website that explains the differences in the Ljutic single barrel trapguns? I realize they are probably small differences in weight and receiver thicknesses, but I'd really like to get a handle on these. Thanks in advance!

Mike
 

·
Registered
Joined
·
179 Posts
The "Banana Gun" had a large barrel, like perhaps a 10 gauge or bigger, then inside it, was the 12 gauge barrel. The point of impact was changed by a screw on the bottom of the outer "big" barrel, running through to the end of the 12 gauge barrel, and which could be screwed in or out.
I had one for a while. After running 50 trying it out, trading my Mono Gun, I found I could not shoot it as well as the Mono.

Jim Brown, Lincoln, NE, may still have one.
Sam Ogle, Lincoln, Ne.
 

·
Premium Member
Joined
·
10,399 Posts
How much different is the 73?

I know it was supposed to be a lower cost alternative

But how much different

Regards from Iowa

Gene
 

·
Ljutic Nut
Joined
·
2,929 Posts
Here is what my Banana Gun looks like


Jim R
jimr_2008_030310.jpg


jimr_2008_030313.jpg


jimr_2008_030333.jpg


jimr_2008_030334.jpg


jimr_2008_030335.jpg


jimr_2008_030336.jpg


jimr_2008_030345.jpg


jimr_2008_030346.jpg


jimr_2008_030347.jpg

 

·
Registered
Joined
·
7,255 Posts
The 73 or X73 as some refer to it was basically a lower priced "plain jane" Monogun....the sides of the reciver aren't milled like the Mono and the forend has a different release mechanism, but the triggers are very similar (and good). They also came with very plain wood, usually Claro walnut. Mine had "upgraded wood" according to Ljutic. Most came with 33" BBls. I and a few others have upgraded our wood and IMHO they are the best bargain on the used market. They are a target smokin' machine! I don't know how many were made buy I've read that Ljutic discontinued them because they weren't much cheaper to manufacture than the Mono.

Ron Burr
 

·
Ljutic Nut
Joined
·
2,929 Posts
This is a first series Bi-Gun #41
jimr_2008_030348.jpg


jimr_2008_030349.jpg


jimr_2008_030350.jpg


jimr_2008_030351.jpg


jimr_2008_030352.jpg


jimr_2008_030353.jpg


jimr_2008_030354.jpg


jimr_2008_030358.jpg

 

·
Ljutic Nut
Joined
·
2,929 Posts
This is the Ljutic Semi Auto Rifle in .35 Remington
jimr_2008_030359.jpg


jimr_2008_030360.jpg


jimr_2008_030361.jpg


jimr_2008_030362.jpg


jimr_2008_030363.jpg


jimr_2008_030364.jpg

 

·
Ljutic Nut
Joined
·
2,929 Posts
This is the Ljutic S X S 22mag Pistol.
jimr_2008_030365.jpg

 

·
Ljutic Nut
Joined
·
2,929 Posts
No the the gun is maked "Banana Gun" and the inner barrel does rest on the one side and as soon as you turn the screw it comes to center, I don't know why it just does.

He are some pictures of a LM-6
jimr_2008_030366.jpg


jimr_2008_030367.jpg


jimr_2008_030368.jpg


jimr_2008_030369.jpg


jimr_2008_030370.jpg

 

·
Ljutic Nut
Joined
·
2,929 Posts
Here is a "Selka"

jimr_2008_030371.jpg


jimr_2008_030372.jpg


jimr_2008_030373.jpg


jimr_2008_030374.jpg


jimr_2008_030375.jpg




Thanks to Mike for letting me take pictures of some of his Ljutic's
 

·
Ljutic Nut
Joined
·
2,929 Posts
Here is a very rare Space gun with two barrels
jimr_2008_030376.jpg


jimr_2008_030377.jpg

 

·
Ljutic Nut
Joined
·
2,929 Posts
Bi-Matic with a reverse Monte Carlo Stock
jimr_2008_030394.jpg


jimr_2008_030395.jpg


jimr_2008_030396.jpg

 

·
Ljutic Nut
Joined
·
2,929 Posts
Centennial Pro SS and a very old Dyna-Trap
jimr_2008_030397.jpg


jimr_2008_030398.jpg


jimr_2008_030399.jpg


jimr_2008_0303100.jpg


jimr_2008_0303101.jpg


jimr_2008_0303102.jpg

 

·
Registered
Joined
·
402 Posts
Discussion Starter #14
Thanks for the info! I'm basically still clueless as to the differences in the currently available SBT, but it was interesting to see all the models I had never seen before. One question is which model had the lightening holes and what model had a thicker or heavier receiver?

Mike
 

·
Registered
Joined
·
2,103 Posts
My Pro 3 LTX with 35" barrel.

<a href="http://s274.photobucket.com/albums/jj271/mbunk/?action=view&current=LJUTICpro3001.jpg" target="_blank">
LJUTICpro3001.jpg.gif
</a>



<a href="http://s274.photobucket.com/albums/jj271/mbunk/?action=view&current=LJUTICpro3009.jpg" target="_blank">
LJUTICpro3009.jpg.gif
</a>
 

·
Ljutic Nut
Joined
·
2,929 Posts
Ljutic ARS



jimr_2008_030392.jpg


jimr_2008_030387.jpg


jimr_2008_030383.jpg


jimr_2008_030385.jpg

 
1 - 16 of 16 Posts
Status
Not open for further replies.
Top