Trapshooters Forum banner

Phillips Gunsmithing

4288 Views 22 Replies 23 Participants Last post by  deadeye45
Does anyone have any experience with Phillips Gunsmithing out of Texas?
Status
Not open for further replies.
1 - 20 of 23 Posts

· Registered
Joined
·
6,231 Posts
He has a solid reputation. His work I've seen looked good and was done for an amazingly reasonable price.

I believe he injured himself in a fall a month or two ago.

-Gary
 

· Registered
Joined
·
21,601 Posts
Did my trigger work as well. Very good and very reasonable. Had my trigger done and back to me in less than 2 weeks.
 

· Registered
Joined
·
266 Posts
He is famous for his trigger work, but he does it all. Resoldered ribs on 2 of my old 101s without needing rebluing. They are as good as new. Tightened up an old Ljutic 2 bbl set. Tight as new.

Phillip is the best IMHO.

Bill Penn
 

· Registered
Joined
·
333 Posts
I left him 9 guns at the MN state shoot a couple of years ago Had to leave and come back in a couple days. Guns ranged from Baker, LC Smith, Fox SxS's to P gun and M12. All were done and ready to go as promised when I came back.
Made part for the Baker SxS and had firing pins on hand for the LC. Great to
work with.
Thanks Phil.
Gary Owen
 

· Registered
Joined
·
579 Posts
Sent him an 1100 trigger to be reworked and he couldn't get to it when he promised, so he reworked it and returned it to me ....no charge. Trigger is tight and light.

Don in PA
 
1 - 20 of 23 Posts
Status
Not open for further replies.
Top