Trapshooters Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
1,812 Posts
Just FYI, no such thing. MX8 is a top single only. Your probably looking for a MX15 or MX2000 unsingle barrel.
 

·
Registered
Joined
·
99 Posts
Discussion Starter · #4 ·
can you measure from right in front of the mounting lug to the top of the rib? my O/U barrel is 1-15/16" want to see how high the MX 15 rib is how much are you asking for it?
 

·
Registered
Joined
·
138 Posts
can you measure from right in front of the mounting lug to the top of the rib? my O/U barrel is 1-15/16" want to see how high the MX 15 rib is how much are you asking for it?
This is the barrel you acquired about on AT.COM. I sent you the measurements previously. I also have an MX2000 barrel I would consider selling. PM me with a tele # to discuss the barrels. Bruce
 

·
Registered
Joined
·
1,812 Posts
can you measure from right in front of the mounting lug to the top of the rib? my O/U barrel is 1-15/16" want to see how high the MX 15 rib is how much are you asking for it?
Assuming you have a step rib MX8 o/u. The MX15 will be about 1/4" taller. Mx2000 probably a little less, 1/8"?

Ive found a MX2000RS and Db81 o/u to match the MX15 rib heigh very close though the DB81 shoots pretty flat.
 

·
Registered
Joined
·
138 Posts
I’ve got a MX2000...34” fixed choke...ported Unsingle I would consider selling. PM for info.
 

·
Banned
Joined
·
493 Posts
I’ve got a Perazzi MX 14 UnSingle barrel, 34” with 5 Wrights choke tubes that is on my MX 8 receiver now. PM for info. and pictures.
 
1 - 11 of 11 Posts
Top