[evandowns]

I am looking to add a skeet barrel to my perazzi.I have heard that the inertia trigger has problems setting with the lighter gauges. Is this true? If it is are there any ways to modify the trigger to fire reliably? If not can you convert the trigger to a mechanical trigger?

Thanks,
Evan

 

[whiz white]

410 & possible 28 requires a larger Inertia Block.

I carry them.

WW

 

[JT 27]

I had Giacomo install a .410 inertia block in my MX 10 with PFS stock. It was not reliable shooting doubles with a 1 oz. first shot. Never another problem

 

[Rlw2]

Ship the trigger to Giacomo, I shoot 20, 28 & 410 thru my mx/2000/3 with sub gauge tubes. No problems at all.

 

[SMITH47]

Whiz White and Doug Braker can handle this for you..

You may want to get an estimate of turn around time before you send your trigger to anyone ?

 

[whiz white]

Here's what we're talking about...

410 Inertia Block #158 is on the left and a typical one on the right.

WW

 

[drgondog]

Whiz White

 

[1perazzi]

How much are these larger blocks Whiz?

 

[whiz white]

All the same price, well at least prior to PUSA raising [email protected] $77.91.

Whiz

 

[Texshooter]

Just for fun; does anyone make/convert a P trigger to mechanical. AJ

 

[claybrdr]

May need to take a coil or two off the inertia block spring too.