Trapshooters Forum banner

Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
2,221 Posts
Discussion Starter #1
I've owned Bowens and Allems but not the Allem Roller Release. In your opinion, which is the best (all types including Precision, Reitz and Crenweld) and why.

milt
 

·
Vendor
Joined
·
19,639 Posts
Milt. the question is a bit broad and asks guys to justify their choice. Ask a more specific question if you can.
 

·
Registered
Joined
·
2,221 Posts
Discussion Starter #3
Thanks Jack. It's the Allem Roller and Precision I'm considering and I'm not familiar with either. I am familiar with Reitz, Allem Standard and Bowen design and performance and I'm not considering purchasing any of these. So please comment on the Allem Roller and Precision only but OK to compare with others.

milt
 

·
Registered
Joined
·
4,019 Posts
I have an Allem Roller and a Precision. They are both very good but both will wear if you don't keep grease on the hooks.



rickn_2008_1709171.jpg




I'd like to see Allem attempt to make a release with a roller instead of the hook and pin setup. A small roller wheel that would drop into a recess in the hammer...a roller top and bottom.
 

·
Registered
Joined
·
3,685 Posts
I am very happy with the Double Release conversion that Jerrie White (Ft. Collins Colo) did for me on my MX-3. I could not justify the cost of a Precision Trigger for my 1982 entry level P-gun.
 

·
Vendor
Joined
·
19,639 Posts







If you are a deliberate, establish the proper lead type of shooter all triggers will work for you with time and practice. If you are a shoot while going thru the target, then buy a trigger that you can hav emade quicker.
 

·
Registered
Joined
·
2,221 Posts
Discussion Starter #9
Click on above URL.

This is a Allem Roller Release. As you can see, it is of different design than the hook-pin Allem design that some call allem roller release. This design has changeable rollers of different size for tuning. Click on home page for more info as to why this design is different from Standard Allem, Bowen, Precision and Reitz release MX triggers. If anyone has a true Allem roller...please chime in.

Go to this site for an enlarged and more complete picture:

www.allemcraft.com/roller-release.htm

milt
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top