Trapshooters Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
I just pick up a Perazzi MX-15 over the weekend but was wondering what does the numbers on the chokes mean and there measurement. They are #2,4,6,8,10. Which one is a full choke and so on?
Thanks for the info
jonese
 

·
Registered
Joined
·
37 Posts
Perazzi chokes are in increments of .004

ie:
2 = .008 or Improved Cylinder
4 = .016 or Light Modified
6 = .024 or Improved Modified
8 = .032 or Light Full
10 = .040 or Full
 

·
Registered
Joined
·
7,663 Posts
The numbers on Perazzi chokes are 1/10 of mm. That's the constriction of each choke.

x4 as above mentioned you'll get it in 1/1000 inches. 6x4=24 means 0.020". (Neil corrected me, 0.024")

On left side of the barrel, it'll show the bore size in mm. 18.4 approx. 0.724" , 18.7 approx. 0.736" that 's pretty much the largest bore size allowed by Italian proof house.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top