[fromtheplaines]

I have an older citori and I want to remove the stock and clean it. Since the lower barrel is getting weak primer strikes. I have removed the main screw in the stock. There are two screws behind the trigger guard that I have removed. But the stock won’t separate and I can’t see what is holding it still in place. Am I missing something here? Thanks in advance

 

[john h ashcraft]

after you remove the to trigger guard screws turn the trigger guard to one side and tap on the pistol grip with a rubber mallot while some one holds the receiver it should pop off.

 

[flashmax]

Turn the trigger guard aside. Reinstall the stock bolt almost tight. Tap the stock bolt while holding the stock.

 

[P3AT]

This one.

Pat

Turn the trigger guard aside. Reinstall the stock bolt almost tight. Tap the stock bolt while holding the stock.

 

[fromtheplaines]

Thanks for all of your helps guy!

 

[rbdjr]

Have you noticed it only happens with certain brand shells? Winchesters target from walmart, or walmart federal white box dove loads? I have experienced this in bottom barrel and they fire every time in top barrell, primers set to deep?

 

[fromtheplaines]

No this is a very old citori. And the prior owner didn’t really ever clean it. The amount of crud on the gun all over the gun was surprising