Trapshooters Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I own a 1950 Browning A-5 and I'm looking for a neon site that will fit the round barrel, the browning has no rib, and the only thing I found was a clip on style, but every time I fire the gun, the site pops off. Any help at all would be great.

Regards
Mark
 

·
Registered
Joined
·
71 Posts
Hi Mark

Do you have a front bead hole? There are several types of fiber optic beads that will screw into your front bead hole. Another is to try some silicon on the clip on sight you have now, see if that helps it to stay on. We use a RTV silicone by Permatex to install add on ribs, just make sure the end of the barrel is clean before you install it with the silicone if you decide to go that route.

Good luck Vicki Keen...Keensights
 

·
Registered
Joined
·
35 Posts
Discussion Starter #3
Vicki, I have a small white bead on the front of of the round barrel, I have no idea if the bead comes out,I'll look tonight.

Thanks
Mark
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top