[billp102740]

I have an older model Valmet 412s skeet gun in 12ga. The gun came with a pair of skeet chokes but no other chokes . My question is is there a choke made for other guns that will fit my valmet . To help a little the thread pitch is 0.75 metric , the thread section is 0.715" long and is located o.325" from the bbl inner end. the choke id varies from .722 to 0.728 . which indicate a close to standard bore . the " measurements were taken with a dial caliper . any info on this will be highly appreciated. bill powers

 

[Pointer]

Trulock has chokes that fit the Valmet

http://www.trulockchokes.com/

 

[vatrap]

Bill,
Valmet chokes are unique as far as I know, the standard ones turn up on here or ebay/gunbroker once in a while. Trulock makes extended chokes, ported and unported Sportsmans Guide sells them or you can get them directly from Trulock, they run about $35 apiece. I have 8 or 10 of the standard ones in a box somewhere in the garage, which ones do you need?

Mike

 

[kirbythegunsmith]

Jeff's Outfitters had a bunch of classic stuff for those guns, and he does have the MOD flush tubes $14.95 and extended IM and XFULL for $34.95.


http://www.jeffsoutfitters.com/TIKKACHO1035_Valmet__Tikka_and_Finnclassic_choke_tubes-flush.aspx?panel=3&productid=191&categoryid=76



http://www.jeffsoutfitters.com/TIKKACHO1000_Valmet__Tikka_and_Finnclassic_choke_tubes_extended.aspx?panel=3&productid=190&categoryid=76


http://www.jeffsoutfitters.com/store.aspx?categoryid=1&panel=2&search=valmet


Now you have more choices. Good Luck.


Kirby

 

[billp102740]

A big Thank you to the gentlemen who replied . I was tickled to learn that chokes are available for the Valmet . And its not quite the dinasour I thought . bill powers