Trapshooters Forum banner

Need a Stock Dulicated

4198 Views 31 Replies 23 Participants Last post by  Beretta Young Gun
Hey folks, Ive finnaly finished carving on my model 12 stock and ive go it shooting the way I want it. Unfortunatly its the ugliest thing sitting on the gun rack. Ive considered having it painted but the last stock I had painted chipped and scratched easily. So I want to have my stock duplicated onto a piece of colored laminated birchwood. I need someone that can drill the bolt hole, Inlet the face to the reciever, and rough out the shape and contour of the stock. I can do the final sanding and I have a gentelman that does a really good job of finishing stocks. I dont even want checkering cut into the stock. I will also want the forearm dulpicated as well. Im willing to shell out the cash if the job is done right, But since this will be a fairly rough job i dont expect to pay a whole lot. If you do any work like this or have a duplicator or know of any one that will do this kind of work for a reasonable price, please let me know. Ive attached a few pics so you will have an idea of what you could be getting into. BYG
Cosmetics Material property Lipstick

Electronic device

Red Material property

Not open for further replies.
1 - 1 of 1 Posts

· Registered
4,468 Posts
As curved as your comb is you better make sure your cheek is anchored exactly the same all the time. Some guys crawl foward or lean back when the pressures on.

You must have a long neck, I do as well.

I made one for a 391 out of bondo that looks similar to yours. AS posted above just keep working it with sandpaper and filler until you get it smooth, yours is still very rough. Then paint and clear coat.
1 - 1 of 1 Posts
Not open for further replies.