Trapshooters Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1,708 Posts
Discussion Starter #1
The following photos are a K-80 that we did for a skeet shooter, the forend has been made oversize per customer request and it is now going to Speed Bump Stock works for his system to be installed as per customer request. The checkering was Cindy's first attempt, for a somewhat difficult pattern. I think she did a good job an a piece of wood that was a little on the wet side and the points did not hold real well in the pattern. Hope that you enjoy the photos.

Thank you,

Dennis DeVault

<a href="http://s305.photobucket.com/albums/nn210/Spanky97/?action=view¤t=Tom6KFull.jpg" target="_blank">
</a>

<a href="http://s305.photobucket.com/albums/nn210/Spanky97/?action=view¤t=Tom3KF.jpg" target="_blank">
</a>

<a href="http://s305.photobucket.com/albums/nn210/Spanky97/?action=view¤t=Tom4KS.jpg" target="_blank">
</a>

<a href="http://s305.photobucket.com/albums/nn210/Spanky97/?action=view¤t=Tom5KS.jpg" target="_blank">
</a>

<a href="http://s305.photobucket.com/albums/nn210/Spanky97/?action=view¤t=Tom1.jpg" target="_blank">
</a>
 

·
Registered
Joined
·
1,708 Posts
Discussion Starter #3
DB Bill,

Yes, we still do the conversions but we do not stock the guns. If you want a conversion you have to buy a gun and ship it to us for the work.

Dennis DeVault
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top