[southjblue]

Looking for the part that the old tube primer feed attached to the loader---Redoing an old Mec 500 and would like to keep it all orig---Part not avail anymore---Appreciated if someone has [email protected]

 

[Old Cowboy]

Would that be the same part that was on the 9000G?

 

[southjblue]

I don't think the 9000g had the tube type I'm looking for---The one I'm looking for was the one that had a tube attached and you would put the primers in the tube one by one---I need the part that the tube attached to---Thanks---
George

 

[Old Cowboy]

Yeah, that sounds like a different set-up. Sorry, I can't help you. I've got the parts from the old style auto primer feed on the 9000G that I took off when I installed the new style.

 

[southjblue]

Thanks Cowboy---SJB

 

[sshotshell]

I have one from an old Mec 650. It has all the parts except the spring wire "thingy" that keeps the primers feeding one at a time. Maybe you could easily fabricate a replacement part. Let me know..I'll mail it to you for free.

 

[CAPPER]

I may have what you need.
If you could put up a pic it would help.

 

[roaddawgdriver]

I have a old 650 that has the old style primer tube. what you need is the block that the tube runs thru right?

 

[southjblue]

Yes---it is the block but I don't know if the 650 and the old 500 are the same block----I'll try a pic---Thanks---George

 

[southjblue]

Yes---This is the part I need and a 650 mec will work---Here is a pic---Let me know if you have it----Thanks---George

 

[acorange]

I have one or two laying around.
PM me if still needed.

 

[CAPPER]

On Sat, Feb 23, 2013 - 07:59 PM ET
I told you I might have one.
I do!
Exactly like your pic.

 

[roaddawgdriver]

I have the block if you still need it. the tube is missing though.

 

[southjblue]

Thanks roadd---I think I found one with the tube---George