Trapshooters Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
On my sizemaster , the crimp punch and cap crimp ass. do not come straight down onto shell. Seems the jam nut on punch when I snug it up cocks it all to the side. When left loose comes down ok.Punch is NOT bent. Any fixxes ? Crimp in top of shell is not centered .Or level. Thanks in advance Don Endicott
 

·
Registered
Joined
·
519 Posts
Try removing the jam nut and putting a thick flat washer under the jam nut. Hard to diagnose without seeing it. If that doesn't do any good get in contact with MEC and explain the problem. They are good people.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top