Trapshooters Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
May seem like a dumb question to some but,
is the safety button on an MX8 only for releasing
the drop-out trigger, or is it supposed to operate
as a safety also? Was going to use mine for dove hunting
and discovered the safety did not work as a safety.
Could not slide it back into what would mormally be
the safe position. Fred
 

·
Registered
Joined
·
230 Posts
If it is a target gun that you bought used, perhaps the original owner has blocked it from moving backwards into the "safe" position by installing a roll pin. You can remove the stock and take a look to see if this is the case and it is quite easy to remove.
 

·
Registered
Joined
·
94 Posts
Discussion Starter #4
Thanks for the replys guys. It is an MX8 Special type 4 O/U
that I use for doubles.I bought it used a few years ago. Guess I
will have to remove the stock and look to see if it is pinned.
If it was made as a usable saftey I would like to have it that
way. Fred
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top