Trapshooters Forum banner
1 - 20 of 23 Posts

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #1 ·
Selling my tapered rib top single barrel. The bluing is matte finish (not shiny) and no porting. The barrel is fitted for Briley screw in Series 2 thin wall chokes and comes with mod, light full and full chokes. The barrel is also fitted for a screw in barrel weight as shown. The barrel is in very good condition with a couple of witness marks in the bluing where the forearm fits. I used this barrel on my K80 and it clips right on. Asking $1350 shipped to your door.

20200207_155438.jpg 20200207_155430.jpg 20200207_155438.jpg
 

Attachments

  • Like
Reactions: Mark uhri

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #3 ·
San Diego area.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #4 ·
Reduced to $1250 shipped.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #5 ·
All PM's have been answered.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #6 ·
I'm getting allot of questions regarding the barrel weight. I'm adding this info to help clarify.
The barrel weighs 3.8 lbs. and the screw in weight is .6 lbs. I found the barrel to be too heavy when using the barrel weight, so I just took it off and didn't use it.
I have a K80 made in 2002 and a San Remo model 32 and it fits both of them just fine. I didn't have any fitting done, it just clipped right on when I bought it 6 months ago.
The only reason I'm selling it is I have 3 top single barrels for my K80 and don't need that many.
Here are some pics of the weight installed on my model 32 and then taken off. It is threaded and comes right on and off.
Hope this helps.
20200216_065131.jpg 20200216_065141.jpg 20200216_065205.jpg
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #7 ·
Reduced to $1200 shipped.
 
  • Like
Reactions: Mark uhri

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #8 ·
Offers?
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #9 ·
All PM's have been answered.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #10 ·
Reduced to $1100 shipped to your door.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #12 ·
This is a model 32 barrel. The serial number is 7122 and was made in 1970.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #14 ·
I probably should keep it with the barrel.
Thanks,
Kevin
 

·
Registered
Joined
·
2,168 Posts
I've never seen a barrel like that ,neither the blueing and/or the screw-in weight & that leads me to a question . Since the barrel is 50 years old ,can I assume that's not the original blueing ? Thanks
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #17 ·
I brought the barrel 6 months ago when I couldn't find a replacement ejector for my other barrel just like this one. I found a used ejector and am putting this one up for sale. I have no idea if this is the original bluing or not. I can tell you it is in really good condition and not a mark on it. The inside is shiny all the way and I will stand behind it. If someone buys this and finds something wrong with it I will take it back.
 
  • Like
Reactions: phatkaw

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #18 ·
Final reduction on this barrel. $1000 shipped to your door or it goes into the safe for good.
 

·
Premium Member
Joined
·
2,014 Posts
Discussion Starter · #20 ·
I will let you know if anyone else is interested.
Thanks,
Kevin
 
1 - 20 of 23 Posts
Top