Trapshooters Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
405 Posts
Discussion Starter #1
The pin that is circled on my Model 32 is loose and will push out both ways.
What is wrong and what is the fix for this?
Thanks, Scott

twoatlow8_2008_030319.jpg

 

·
Registered
Joined
·
759 Posts
The pin retains the firing pin block inside the receiver. The eirly model 32`s will have a pin thats larger on the left side. Late models will have a set screw under the left side of the hood. That set screw is probably loose. Larry
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top