Trapshooters Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

· Registered
Joined
·
75 Posts
Discussion Starter · #1 ·
A friend of mine has a Kolar TS and the back end of the rib (Closest to the receiver) is loose. How do you tighten up the rib? Is there a set screw that's used to tighten up the rib that we are missing? Thanks for any helpful comments.
 

· Registered
Joined
·
2,033 Posts
Use the stock driver to snug the allen head bolt in the top of the mono-block. Once it is snug. there will be a little play or looseness in the rib at the back end to allow for it to be adjusted up and down at the front without getting it in a bind.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top