Trapshooters Forum banner

kolar trigger position hex wrench

1043 5
Does anyone know the size of the trigger position hex wrench . I know I could call kolar but why bother them if someone on here has that info . I want to have a couple spares there small. Thanks
1 - 6 of 6 Posts

· Registered
Joined
·
87 Posts
A friend of mine who also has a Kolar or two suggests get one from Kolar, or at least get a good quality brand. This is not the place you want to find out how a cheap imported tool can fail you, like stripping that cute little allen screw.
 

· Registered
Joined
·
357 Posts
I agree on getting a quality tool for that little hex screw.
I went through this process recently and was provided with a .050 allen wrench by a member here. [Thanks ] When it came down to it I was guided to a wrench with a knob end because the little trigger screw resist manipulation with a vengeance! I went with an Eklund angled set.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top