Trapshooters Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter #1
Is there a way to adjust firing pins for deeper hit and heavier hammer spring having problems with the cheaper shells snapping
 

·
Registered
Joined
·
2,222 Posts
I have been into the firing pin area on my Kolar and as far as I can see there is no adjustment. Your best bet is to call Kolar and tell them your problem and they will advise.
 

·
Registered
Joined
·
2,829 Posts
I had a friend (once upon a time), who was having issues with misfires. He was using Federal Top Guns. They put a new firing pin in it that was designed to hit slightly off center. I forget the name that Keith used to describe it. As Goose2 says, call Kolar and ask for Keith Sprangers. Talk to him and he will make sure your issue is resolved. Bill Malcolm
 

·
Registered
Joined
·
126 Posts
Had the same problem Kolar sent me new ones I think I paid $75.00 each supposed to be longer, same problem, a machinest friend made longer ones free. The problem went away
 
1 - 5 of 5 Posts
Top