Trapshooters Forum banner

K80 release trigger fires on pull

1075 Views 2 Replies 3 Participants Last post by  ExFedex
My K80 with double release trigger sometimes bottom barrel will fire but top barrel release does not set also wanted to set release and gun fired as i pulled trigger to set release had service on gun 6 months ago 1st problem in 15 years anyone have similar problem like this. skeeter 88
1 - 3 of 3 Posts

· Registered
Joined
·
1,276 Posts
FWIW I had similar problem with an SKB 85TSS recently. Dry fired about 25 empty hulls with the stock removed. About 5 of the 25 would fire very early like a pull thru. Taking the advice of a TS.com member I cleaned some over lubrication from the hook and pin itself. 3 boxes later its back to its old reliable self. I think a release hook needs a bit of drag.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top